SASFORKS EXTREME AUTO PROCESSOR Скачать руководство пользователя страница 6

Страница: 6 / 63

SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL

v16

.pub 3/24/2020

Page 6

PROTECTIVE EQUIPMENT

•

Safety glasses with side shields

● Leather gloves

•

Work boots with heavy sole and safety toes ● Hard hat

•

Fire extinguishing equipment

● Adequate spill kit, oil dry etc.

•

Other such safety equipment to protect personnel from injury.

Puncture or cut injuries may occur if contact made with sharp objects. Sharp

objects are present from breaking materials out of scrap cars. Avoid contact.

Do not work under grapple claws, hold down, or any object lifted by this equip-

ment. An unexpected movement, shift in the object, or hydraulic failure may

cause claw, hold down, or object drop. Serious injury or death may occur.

PERSONNEL TRAINING

Prior to installation or use of this equipment all personnel must review this operator

manual, excavator manufacturer’s manual and other pertinent safety manuals and be

trained by qualified personnel. All hazards must be identified to ensure personnel

avoid these hazards. Signed documentation certifying individual training has been

completed is a must. Periodic retraining is recommended. Failure to follow Manufac-

turers recommendations can result in serious injury and property damage.

SITE PREPARATION & CLEAR OPERATING SPACE RECOMMENDED

•

The Extreme™ Auto Processor should only be used in areas that are equipped

with proper fluid containment measures, to ensure capture and containment of

residual fluids in accordance with any and all environmental regulating body.

•

Operation area must be sufficiently clear of buildings and overhead power lines.

•

No Smoking, Safety Glasses & Hard Hat Required signage is recommended.

•

Provide adequate space around this equipment to ensure all persons are kept at

least 15 Meters (50 feet) away from the equipment and cars being moving by it.

VEHICLE PREPARATION PRIOR TO USING THE EXTREME™ AUTO PROCESSOR

•

Prior to use of this attachment, remove all batteries, gasoline, diesel fuel, all

types of fuels, mercury switches, air conditioning Freon, engine oil, transmission

fluid, antifreeze and other fluids.

•

Engines, transmissions, and other components will be damaged, and only be

suitable for metals recycling, not as cores or resalable operable parts.

Vehicles contain several hazardous elements that pose explosion and fire haz-

ards, such as gasoline and electric batteries containing battery acid. Be sure

these are safely removed prior to using the EXTREME™ Auto Processor.

Failure to remove may result in explosion, fire hazard & injuries.

Keep adequate fire suppression equipment accessible and persons trained on

operation.

GENERAL SAFETY GUIDELINES (PAGE 6)

SAS™ EXTREME™ AUTO PROCESSOR

S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA

Phone: 920-845-2307

•

1-877-SAS-FORK

•

Fax: 920-845-2309

•

Web: www.sasforks.com

Содержание EXTREME AUTO PROCESSOR
































































Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды

SASFORKS EXTREME AUTO PROCESSOR, Руководство пользователя

Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды