SASFORKS EXTREME AUTO PROCESSOR Скачать руководство пользователя страница 19

Страница: 19 / 63

SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL

v16

.pub 3/24/2020

Page 19

DETERMINING LIFT CAPACITY (PAGE 19)

SAS™ EXTREME™ AUTO PROCESSOR

READ & FOLLOW SAFETY INFORMATION IN ORIGINAL EXCAVATOR MANUFACTURER’S

OPERATOR, SAFETY AND SERVICE MANUALS.

Excavator will handle loads differently than with the original dozer blade & bucket.

The purpose of this document is to describe the

method of

load rating and operating limitation

parame-

ters

of the Extreme auto processor as indicated on the operating data plate of the device.

On this product, SAS Forks installs a data plate on the product which specifies ;

■ Product model

■ Product serial number

■ Product weight

■ Product production date

■ Notice to refer to Excavator OEM positional lift chart and make appropriate reductions in permissible lift

capacities to offset any differential in the original rated attachment, if any, and the weight of the Product,

the Extreme Head Assembly.

It is important to note that the actual load (lift) ratings of the product are impacted by multiple factors

in which the operator is responsible to take into account and to reduce the weight of any potential

item to lift, to ensure machine remains stable, and does not tip. The below items are not a comprehensive

list, but these complex work variables must be taken into account by the operator to ensure

safe operation;

■ Ground or working surface stability

■

(More unsafe: soft, unpredictable or variable surface compaction /vs/ More safe: solid surface)

■

Positioning of excavator on such working surface

■

(More unsafe: angled and tilted /vs/ More safe: flat & level )

■

Proximity in which excavator is to work and materials to be lifted.

■

(More unsafe: Extending lift arms and lifting /vs/ More safe: working close with minimum reach

■

Lowering and engagement of outriggers to working surface

■

(More unsafe: Outriggers removed and/or not engaged to ground /vs/ More safe; Outriggers

lowered fully and engaged with solid working surface.

■

Amount of hydraulic pressure operator allocates to the grapple of the Extreme product

■

(More unsafe: Operator not providing sufficient hydraulic pressure to engage object lifted /vs/

More safe: Operator engages excavator’s hydraulic system to ensure secure grappling.

■

Lift capacity limitation of excavator, based on excavator’s OEM lift capacity chart

■

(More unsafe: Not understanding parameters and assumes within the excavator’s OEM chart

vs/ More safe: Clearly understand excavator’s OEM load chart, product weight, & parameters.

■

Strength and durability of the item being lifted. (This product is meant only to lift scrap metal,

never

lift any good resalable product. Never lift any persons or any device holding any persons.

■

(Prohibited & dangerous: Attempting to lift persons in any manner will result in injury or death.

■

(More unsafe: Lifting items in such a manner that may rip or separate /vs/

■

More safe: Grapple items on heavy surface that provides a secure grip with Extreme grapple.

Содержание EXTREME AUTO PROCESSOR
































































Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды

SASFORKS EXTREME AUTO PROCESSOR, Руководство пользователя

Результаты поиска

Содержание EXTREME AUTO PROCESSOR

Отзывы:

Похожие инструкции для EXTREME AUTO PROCESSOR

Бренды по названию

Популярные бренды