background image

 

 

 

 

 

 

17

 

 

 
 

 

1. Manufacturer  grants  warranty for proper functioning  of the  heating  boiler  SAS 

UWG, what is confirmed with the stamp of  factory.                                                                                                                          

 
2. Manufacturer grants warranty for the period covering

  

the boiler installed and 

operated  according  to  all  terms  and  recommendations  included  to  Technical -
Start-Up Documentation (TSD).                      

 
3. A buyer gets together with terms of warranty hereby Technical-Start-Up-

Documentation (TSD),  which is laid down rules for the proper operation and safe 
exploitation of the  heating  boiler.  Hereby documentation (TSD) must be reading 
careful and it is obligatory. 

 
4. Warranty terms are binding from the date of the purchase for the period of:                                                                                    

a. 4 years for efficient functioning of  the boiler,  
b. 2 years on the heat protective grate,                                                      
c. 2 years on electronics and automation components mounted on the boiler and 

produced by other manufacturers:  

 air draft regulator 

 thermometer 

 

5. Warranty does not cover consumable items:  

 sealant (rope)                                                                                                                             

 
6. Manufacturer is obligated to carry out the charge free repair under warranty in time 

period of 14 days starting from the date of application (done by user).                                                      

 
7. Boiler’s repair, the construction or insulation alterations made by user or other 

third parties – will cause the warranty to be invalid.  
 

8. Application of reclamation should be addressed at manufacturer.   
  
9.  Boiler  replacement  realized  by  manufacturer  is  only  possible  based  o  expert 

opinion, that repair is not workable. 

 

10. If the advertiser does not allow double-warranty repairs, despite the willingness of 

the guarantor to comply with it, is deemed to have resigned from the advertiser 
claims contained in the application of reclamations.                                                                                                             

 

11. In  case  of unfounded  service  summon,  the  customer shell  pay  travelling  and  

work  costs. Before you  call  service,  please  familiarize  yourself  with  the 
chapter  "States  of  improper  boiler’s functioning". We always offer help by 
telephone. 
 

12. Warranty card makes up the only ground for charge free repair. 

 

12

.

  TERMS OF 

WARRANTY

 

 

Содержание UWG





















Отзывы: