16
5.6
Replacing the Paper Roll and
the Ink Ribbon
To replace the paper roll, first
remove the printer cover by pushing
it backwards on the device. After
the cover has moved out of the
locking mechanism, it can easily be
removed by lifting it upwards.
Push the spindle into the hole in
the paper roll and insert the roll in
such a way that the spindle lies in
the holding device provided. The
paper must be fed on the lower
side backwards towards the print
unit. Feed the start of the paper
strip from the front directly into the
opening of the printer and briefly
press the "Paper" key. The paper
now feeds automatically through
the printer, along the ink ribbon,
and re-emerges from the top of the
print unit.
Now feed the printer paper from
the back|below through the slot in
the printer cover to its upper side so
that the paper re-emerges from the
device under the transparent cover.
Now replace the printer cover
on the device by feeding it from
above|behind onto the device and
pushing it from the back towards
the front until the cover slides into
the locking mechanism provided.
To replace the ink cartridge, the
printer cover must also be removed.
Afterwards, the black unit with
the ink ribbon can be removed by
pulling it upwards on its right side
(label "Lift"). The new ink cartridge
can then be reinserted in the oppo-
site sequence and the printer cover
can be closed again.
Make sure that the spindle of the
paper roll is correctly positioned in
the holding device provided.
Otherwise, the paper roll may jam
during the printing operation.
