15
5.5
Connections With Internal
Pressure Sensor
The Sartocheck
®
3 plus can be
operated with an internal pressure
sensor and with various tube con-
nections. The tube connections for
the Sartocheck
®
3 plus are shown in
Fig. 5-7 and Fig. 5-8.
Attention!
Do not connect Sartocheck
®
3 plus
to pressurized or high temperature
systems! Wait until the whole
system is at room pressure and
temperature!
Inlet Pressure During Operation
with Internal Pressure Sensor
The minimum operating pressure
required depends on the test meth-
od selected, but should be
at least:
> 4000 mbar and > 500 mbar
above the test pressure or above
the max. B.P. entered.
Check to make sure that all inlet
and outlet pressure tubing is con-
nected properly, that all electrical
connections have been correctly
installed, and that the paper roll
as well as the ribbon cartridge
have been inserted.
Fig. 5-7 | Connection with internal pressure sensor
Fig. 5-8 | Connection with internal pressure sensor and external vent
Sartocheck
®
3 plus
Sartocheck
®
3 plus
