Sartorius PR5230, Инструкция по эксплуатации инструмента, Страница: 94 / 208

Commissioning PR5230 Instrument Manual
EN-94 Sartorius
5.3.7 Calibration Menu
- Calibration Calibration of weighing electronics
- New
Reset Span and deadload Continue, Cancel
- Max 0.00001 ...<3000>... 999999 <kg>, t, lb, oz, g, mg
- Scale interval <1>, 2, 5, 10, 20, 50
- Deadload at <0.000000 mV/V> or [by load]
- Max at <1.000000mV/V> or [by load]
by load 0.00001 ... 999999 <kg>, t, lb, oz, g, mg
- Calibrated at (display only)
- Sensitivity ( μ V/d) (display only)
- Test Determine test value
Exit calibration Save or cancel changes
- Modify Only for minor modifications/ setting new dead load, otherwise [New
see New
- Param
- Measuretime 5 ms, 10, 20, 40, 80, <160>, 320, 640, 960, 1280, 1600ms
- Digital filter <off>, bessel, aperiod., butterw., tscheby.
- Fcut Cut off frequency, only unless filter 'off', 0.1 - 80.0 Hz
- External supply
External supply: above 8V (>8 V), below or equal 8V (
8 V)
- Test mode <Absolute>, Relative
- W
&
M <none>, OIML, NSC, NTEP
- Standstill time 0.01 s…<0.50 s> ... 2.0 s
- Standstill range 0.00 d ... <1.00 d> ... 10.00 d (range is dependent on response time)
- Tare timeout 0.1 s ... <2.5 s> ... 25 s, timeout due to instability
- Zeroset range 0.00 d ... <50.00 d> ... 10000.00 d
- Zerotrack range 0.00 d ... <0.25 d> ... 10000.00 d
- Zerotrack step 0.00 d ... <0.25 d> ... 10.00 d
- Zerotrack time <0.0 s> ... 25 s
- Overload
0 d ... <9 d> ... 999999 d
- Minimum weight 0 d ... <50 d> ... 999999 d, minimum weight
- Range mode <Single range>, Multiple range, Multi-interval
- View Calibration (if CAL switch is closed)
- Max (display only)
- Scale interval (display only)
- Deadload at (display only)
- Max at
(display only)
Calibrated with/Not calibrated (display only)
- Sensitivity ( μ V/d) (display only)
- Param Items as for Param (display only)