Sartorius PR5230, Инструкция по эксплуатации инструмента, Страница: 132 / 208

Commissioning PR5230 Instrument Manual
EN-132 Sartorius
5.9.2 Setup
This event log memory contains events, which are stored as altered data in EEPROM.
Code Events
1 Wrong PIN has been entered.
2 EEPROM has been deleted.
10 Start new adjustment.
11 Set dead load with mV/V.
12 Set span with mV/V.
13 New dead load with weight.
14 New SPAN with weight.
15 New full scale.
16 New scale interval.
17 Memory for adjustment.
18 Changes undone.
100 Serial parameters stored.
101 Change of serial interface assignment.
200 Serial assign stored.
300 Digital input/output changed.
400 Parameter limits changed.
500 Analog out parameters changed.
600 Field bus parameters changed.
700 Network parameters changed.
800 Software parameters changed.
900 Printer parameters changed.
1000 ADC parameters changed after download via HTTP.
1001 Core EEPROM changed after download via HTTP.
5.9.3 Indicator
Code Events
1 Internal arithmetic error
2 Overload
3
No valid ADC values
6 No sense input voltage
7 Negative input voltage (wrong polarity)
9 Faulty communication with ADC
5.9.4 Powerfail
Only the instrument switch-on is recorded.
5.10 Backup of EAROM
This function will be selected in the main menu under [Backup of EAROM].
The configuration data of the two EAROMs can be saved for back-up on the PC and downloaded, if necessary.
The content of the two EAROMs in the system can be saved for back-up on the PC and downloaded, if
necessary.