Automatic Taring after Data Output (Print on Request)
This convenient setting lets you checkweigh a series of samples or products
without having to unload the balance after each weighing operation.
– the sample remains on the pan after the weight readout has been printed
or transferred to an on-line computer
– the balance is tared automatically after the weight readout has been printed
or transferred to an on-line computer
– you simply load the next sample or part
Code
Data output without automatic taring
6 4 1*
Data output with automatic taring
6 4 2
Automatic Output of the Application Parameters
After completing an application started by pressing the
v
key, you can have the
application parameters and results printed out or transferred to an on-line computer.
Code
Off
7 1 1*
On
7 1 2
Data ID Codes
To help you identify weights, piece counts, percentages, etc., a code letter is
printed or displayed in front of these values. For example, an “N” printed
or displayed in front of a weight value identifies it as a net weight. If you set the
code for “without data ID code,” only net weights, results in percent and
counting results will be output. You will find the data ID codes for a particular
application program listed in the corresponding description.
The ID code increases the data output format for each weight readout
from 16 to 22 characters.
ID code for data output
Code
Without
7 2 1*
With
7 2 2
* = factory setting
37
