Sanyo SPW-C0705DZH8, Технические данные инструкция

Страница: 144 / 703

1 2
17 18
33 34
49 50
8
24
40
56
9
25
41
57
10
26
42
58
16
32
48
64
[Setting fixed timer groups]
Schedule timer
1 fixed timer group (64 units together)
4 fixed timer group (16 units together)
8 fixed timer group (8 units together)
(1)
(2)
(3)
(3)
When the normal display appears, press and hold the schedule timer button, the timer button,
and the button for 4 seconds or longer. “Ad-01” appears, blinking, in the current time display.
(Ad indicates “address” and 01 is the central address number.)
(2)
Turn ON S41 setting switches 2 and 3, then turn ON the power. Restart and initial communications are
performed. (SCAn blinks in the display.) The normal display appears after several minutes.
(1)
Manual timer group settings allow central control addresses to be assigned freely within the timer groups.
Use the button in the area to select the timer group. Then use the button in the area to
select the central control address to assign and register for that timer group. Press the button to
register the selected central control address.
Procedure for making manual timer group settings (manual group assignments)
Finally, turn ON the schedule timer power. Initial communications are performed. (SCAn blinks in the display.)
The normal display appears after several minutes, and the timer group settings are confirmed.
Next, use S41 switches 2 and 3 to set the number of timer groups you wish to create.
First, use a different central control device (system controller or other device) or the wired remote controllers
to set the central control addresses, as assigned in the figure above, to the indoor units that will be subject to
group timer control.
Procedure for making fixed timer group settings (fixed groups)
Central control address 49 – 56
Central control address 49 – 64
Central control address 57 – 64
Central control address 33 – 48
Central control address 41 – 48
Central control address 33 – 40
Central control address 17 – 32
Central control address 17 – 24
Central control address 25 – 32
Central control address 9 – 16
Central control address 1 – 16
Central control address 1 – 8
Central control address 1 – 64
Creating Timer Groups
The schedule timer can be set for 6 time status
changes. These can be used to create up to 8
groups (timer groups). For systems in which
schedule timers are used, set the timer groups to
match the central control addresses of the indoor
units that will be subject to group timer control.
The timer-group settings for the schedule timer
involve assignment of central control addresses.
Therefore, use the system controller (or other
central control device) or wired remote controllers
to set the central control addresses of the
indoor units, then make the schedule timer set-
tings.
3-92
Control of 3-WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
TD831143-00̲W-3WAY.indb 92 TD831143-00̲W-3WAY.indb 92 2008/12/01 10:26:48 2008/12/01 10:26:48