SANY SY60C, Руководство по эксплуатации и обслуживанию

Страница: 87 / 160

MACHINE OPERATION
4-23 SY60C Excavator OMM
Traveling at High Speed
When traveling at high speeds, position the front of the
track frame to the direction of travel. See “Directional
Arrow” on page 4-16.
Operating in Water
0002887
Figure 4-54
NOTICE!
• Do not operate the machine in a marine
environment.
• When driving the machine out of water on a
grade steeper than 15°, the rear of the upper
structure may be submerged in water. The
radiator fan may sustain water damage that can
result in damage to the machine or cause the
equipment to operate improperly.
• Do not drive the machine into water where the water
depth is above the center of the final sprocket (1).
• Grease the parts that have been submerged until the
old grease has been displaced from the bearing
(especially from the bucket pin).
• Make sure that the job site surface is hard enough for
the machine.
0002889
Figure 4-55
• Continuously monitor the condition of the machine
when operating in water. Move the machine to a
different location if necessary.
• Make sure that the swing bearing, swing drive gear,
and swivel do not become submerged in water.
NOTE: If the swing bearing, swing drive gear, or swivel
area (2) has been submerged in water, they must
be cleaned. Lubricate the swing drive gear and
swing bearing.
1
1
2