SANY SY60C, Руководство по эксплуатации и обслуживанию

Страница: 80 / 160

4-16
MACHINE OPERATION
SY60C Excavator OMM
Moving the Machine
Machine Moving Precautions
WARNING
• Check the surroundings and sound the horn
before moving the machine.
• Do not allow personnel to approach the machine
without the operator’s approval.
• The rear of the machine is a blind area. Use the
rearview mirrors and be extremely careful when
backing up the machine. Use a signalman as
needed.
Failure to follow these warnings could result in
death or serious injury.
Directional Arrow
0003879
Figure 4-26
The directional arrow (1) on each of the track frames
indicates the machine front and the forward movement of
the machine. Check these arrows before using the travel
control levers/pedals. The track sprocket is at the rear of
the track frame. If the track frame is facing backward, the
travel direction will be opposite the maneuvering direction
of the travel control lever/pedal. The machine will move
forward when you pull the control levers backward and
backward when you push the control levers forward. Left
and right control directions are also reversed when the
track frame faces backward.
Travel Control
NOTICE!
• Stop the machine for 5 minutes after every
15 minutes of traveling. Prolonged traveling may
strain the travel motors.
0002757
Figure 4-27
Adjust the throttle control dial (1) to MAX (high idle).
Forward Travel
0002828
Figure 4-28
Push both travel control levers equally or press the top of
both foot pedals equally to move the machine forward.
Backward Travel
Pull both travel control levers equally or press the bottom
of both foot pedals equally to move the machine
backwards.
Spot Turning
To the Left
0002831
Figure 4-29
Simultaneously push the right travel control lever (1) or
press the top of the right foot pedal (2) and pull the left
travel control lever (4) or press the bottom of the left foot
pedal (3) to rotate the machine to the left.
1
1
3
1
2
4