manualshive.com logo in svg
  • Главная
  • /
  • SANY
  • /
  • SY115C9
  • /
  • Инструкция по безопасности, эксплуатации и техническому обслуживанию

SANY SY115C9, Инструкция по безопасности, эксплуатации и техническому обслуживанию, Страница: 79 / 445

Поделиться
Скачать
SANY SY115C9 Скачать руководство пользователя страница 79

Safety

Safety, Operation and Maintenance Manual - Sep 2012

2-46

SY115C9/135C/155H Crawler Hydraulic Excavator

2.4.2.6 Safe traveling 

 

●

Check the travel direction of the machine 
before driving it. Make sure you know how 
to operate the control levers and pedals.

 

●

Press the upper part of the control pedal or 
push the control lever forward to move the 
machine in the direction of the idlers.

 

●

Work equipment should be kept 20-30 cm 
(8-12 in) off the ground when moving on a 
slope. In case of an emergency, the work 
equipment could be lowered to ground im-
mediately to help stop the machine.

20~30cm

(8~12in)

CZ335-1102038

CZ335-1102039

CZ335-1102040

Driving the machine on a slope may cause 
it to slip or tumble down, resulting in seri-
ous injury or death.

 

●

When driving the machine up a slope, face 
the cab to the uphill direction; when driving 
down a slope, face the cab to the downhill 
direction.

 

●

Before traveling, always check the hard-
ness of ground before your machine.

 

●

When driving the machine up a slope, ex-
tend the work equipment to keep balance. 
Keep the work equipment 20-30 cm (8-
12in) off the ground and drive the machine 
slowly.

 

●

When driving down a slope, lower the en-
gine speed, keep the travel control levers 
close to 

“

neutral

”

 position and drive 

slowly.

Fig. 2-60  

Fig. 2-61  

Fig. 2-62  

WARNING

Содержание SY115C9






























































































































































































































































































































































































































































Отзывы:

Нет отзывов