SANY SY115C9 Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 445

SANY SY115C9 Скачать руководство пользователя страница 23

Introduction

Safety, Operation and Maintenance Manual - Aug 2012

1-6

SY115C9/135C/155H Crawler Hydraulic Excavator

tact your Sany distributor before operating or
repairing the machine.

1.2.3.1 Introduction

This section provides an overview of what is
covered in the rest of this manual, including
machine label information and Sany contact
information.

1.2.3.2 Safety

This section covers basic safety information
relating to this equipment. Make sure you fully
understand all the precautions described in
this manual and the safety labels on the ma-
chine before operating or maintaining this ma-
chine. Failure to do so may result in serious
injury or death.

1.2.3.3 System functions

This section provides an overview of all the
controls, alerts and operating systems on the
machine. It is important to study and become
familiar with all systems before proceeding
with any operations.

1.2.3.4 Operation

This section provides some basic operating
procedures for this machine. Study and be-
come familiar with all operating procedures
before performing any job functions with the
machine.

1.2.3.5 Maintenance

This section provides all general maintenance
and repair procedures. (Detailed rebuild / re-
placement / repair information are covered in
a separate shop manual.) Study and become
familiar with all repair and maintenance proce-

«
...
21
22
23
24
25
...
»

Содержание SY115C9






























































































































































































































































































































































































































































Отзывы:

Нет отзывов