SANY SY115C9 Скачать руководство пользователя страница 75 | Manualshive

Страница: 75 / 445

SANY SY115C9 Скачать руководство пользователя страница 75

Safety

Safety, Operation and Maintenance Manual - Sep 2012

2-42

SY115C9/135C/155H Crawler Hydraulic Excavator

and all readings are within normal working
range.

2.4.2 Operation

2.4.2.1 Inspection before operation

●

When conducting inspection, move the
machine to a spacious area without barri-
ers and operate slowly. Any other person is
not allowed to approach the machine.

●

Be sure to buckle the seat belt.

●

Check the gauges and machine operation
for abnormality; check the bucket, arm,
boom, travel system, swivel system and
steering system for abnormal operation.

●

Check for abnormal noise, vibration, heat-
ing, odor or gauge reading; check oil or
fuel for leakage.

●

When the travel control level is in neutral
position, test the engine's speed control
device; operate each control lever and
con

fi

rm they work properly. Understand the

control mode of work equipment.

●

In case of any abnormality, stop operation
and take corrective measures immediately.

2.4.2.2 Prior-operation precautions

To prevent serious injury or death, follow the
items below before moving the machine.

●

It is dangerous to stay in the working range
during machine operation. Sound the horn
to warn people within the working range
before operating your machine.

●

Nobody is allowed to stay on and near the
machine, or within the working range.

●

To improve the visibility in the travel direc-
tion, you may turn the cab if necessary.

●

Assign a signalman at where visibility is
poor.

CZ335-1102030

Fig. 2-51

«
...
73
74
75
76
77
...
»

Содержание SY115C9






























































































































































































































































































































































































































































Отзывы:

Нет отзывов