SANY SY115C9 Скачать руководство пользователя страница 70

Страница: 70 / 445

Safety

Safety, Operation and Maintenance Manual - Sep 2012

2-37

SY115C9/135C/155H Crawler Hydraulic Excavator

2.4 Safe Operation Precautions

2.4.1 Safe starting

2.4.1.1 Safe mounting

When you mount or dismount the machine:

●

Always face the machine and maintain a
three-point contact (one hand and two feet
or two hands and one foot).

●

Never jump on/off the machine. Never
mount a moving machine.

●

Never use any control lever as handhold.

●

Remove the mud, oil dirt and water from
the pedals, handholds and your soles at all
times.

●

The cab must be aligned with the under-
carriage centerline before you enter or exit
the cab.

An unattended machine is dangerous.

CZ335-1102023

CZ335-1102024

CZ335-1102025

Fig. 2-44

Fig. 2-45

Fig. 2-46

Содержание SY115C9






























































































































































































































































































































































































































































Результаты поиска

Содержание SY115C9

Отзывы:

SANY SY115C9, Инструкция по безопасности, эксплуатации и техническому обслуживанию, Страница: 70 / 445

Результаты поиска

Содержание SY115C9

Отзывы: