SANY SY115C9 Скачать руководство пользователя страница 334

Страница: 334 / 445

Maintenance

Safety, Operation and Maintenance Manual - Aug 2012

5-75

SY115C9/135C/155H Crawler Hydraulic Excavator

5.8.6.2 Swing pinion gear grease - check/re

●

Prepare a dipstick.

1. Remove the two bolts (1) from the swing

frame. Remove the cover (2).

2. Insert the dipstick (3) into the grease

through the hole for inspection and
adjustment. Check the grease level, which
should be 14 mm (0.6 in) at minimum, at
where the pinion gear passes.

3. Check the grease to see whether it is milk-

white. Milk-white grease indicates that the
grease has been contaminated. Consult
Sany distributor in order to change the
grease.

Total grease volume: 15 L (3.97 US gal)

4. Use the bolts (1) to reinstall the cover (2).

CZ335-1104069

CZ335-1104070

CZ335-1104068

Always prepare your machine as required
and lock/tag it out before proceeding.

See

“Preparing the machine” on page 2-58 and
“Lock-out and tag-out” on page 2-60.

Fig. 5-76

Fig. 5-77

Fig. 5-78

Содержание SY115C9






























































































































































































































































































































































































































































Результаты поиска

Содержание SY115C9

Отзывы:

SANY SY115C9, Инструкция по безопасности, эксплуатации и техническому обслуживанию, Страница: 334 / 445

Результаты поиска

Содержание SY115C9

Отзывы: