manualshive.com logo in svg
  • Главная
  • /
  • SANY
  • /
  • SY115C9
  • /
  • Инструкция по безопасности, эксплуатации и техническому обслуживанию

SANY SY115C9, Инструкция по безопасности, эксплуатации и техническому обслуживанию, Страница: 372 / 445

Поделиться
Скачать
SANY SY115C9 Скачать руководство пользователя страница 372

Troubleshooting

Safety, Operation and Maintenance Manual - Aug 2012

6-13

SY115C9/135C/155H Crawler Hydraulic Excavator

6.3  Towing the Machine

Towing the machine improperly or using 
wire cables beyond the speci

fi

 cation could 

lead to serious injury or death. 

 

●

Make sure that the wire cables used for 
towing the machine are strong enough, 
which may otherwise result in acci-
dents. 

 

●

While towing the machine, do not use 
wire cables with broken wires (A), re-
duced diameter (B) or knot (C) in order 
to prevent rupture of the wire cables. 

 

●

Always wear protective gloves when 
handling wire cables. 

 

●

Never tow the machine on a slope. 

 

●

Never stand between the towing ma-
chine and the towed machine when 
performing towing operation. 

 

●

Operate the machine slowly and avoid 
imposing sudden load on wire cable. 

Note:

The towing operation must be performed with-
in the maximum towing capacity. 

A

B

C

CZ335-1103215

WARNING

Fig. 6-7 

Содержание SY115C9






























































































































































































































































































































































































































































Отзывы:

Нет отзывов