SANY SY115C9 Скачать руководство пользователя страница 146 | Manualshive

Страница: 146 / 445

SANY SY115C9 Скачать руководство пользователя страница 146

System Functions

Safety, Operation and Maintenance Manual - Aug 2012

3-41

SY115C9/135C/155H Crawler Hydraulic Excavator

3.5.2 Travel controls

●

Do not put your foot on any pedal during operation, except for travel. Unintended ped-
aling could lead to sudden move of your machine and cause severe accidents.

●

Take extra care when driving or steering the machine with pedals. Do not put your foot
on any pedal when they are not used.

Control levers are used to change travel direc-
tion of your machine. Description in brackets

is given for pedal operation.

a - Forward travel:

Push the control lever.

(Pedal tilts forward. )

b - Backward travel:

Pull the control lever.

(Pedal tilts backward. )

N - (Neutral Position): Machine stops.

Remark:

When track frame faces backward direction,
travel direction is opposite to maneuvering di-
rection of travel control lever. (Machine moves
forward when you pull control levers and back-

a

a

a

a

b

b

b

b

N

N

CZ335-1103054

WARNING

Fig. 3-51

ward when you push them. The left and right directions are reversed too.)

Check direction of track frame before you maneuver travel control levers. (If the sprocket is in the
rear, the track frame faces the front.)

With automatic deceleration function, travel control levers can be used to change engine speed
through the following ways.

●

When travel control levers and joystick controls are in neutral position, engine speed will drop
to medium level even if fuel control dial is set above medium speed. If you maneuver any con-
trol, engine speed will rise to the level set by fuel dial control.

●

If travel control levers and joystick controls are in neutral position, engine speed will decrease
by 100 rpm. About four seconds later engine will drop to the level (about 1,400 rpm) set for
automatic deceleration.

«
...
144
145
146
147
148
...
»

Содержание SY115C9






























































































































































































































































































































































































































































Отзывы:

Нет отзывов