SANKI P212, Инструкция по эксплуатации

Страница: 17 / 24

15/20
12. Parameter Setting Method
1) Parameter data setting method
0.0
0C-- 0d-- 0L oF 06 hi
P2xx
06 hi
06 Lo
06 Lo
0.0
Press the
Func key long
for 2 sec.
Set key
Freq ▲▼
keys
Set key
Normal mode screen
Blinking
Vol ▲▼ keys
Press the
Func key long
for 2 sec.
Parameter mode
screen
The normal
mode screen
reappears.
※ When the Set key is pressed after value setting,
the set value is saved.
※ If the Vol ▲▼ keys are pressed without pressing
the Set key in the change process, the changes
will not be saved but cancelled.
If there is no key operation for over 5 min, the
normal mode screen (voltage display) will be
forced to reappear.
※ When the Set key is pressed at the parameter
to be set, the parameter item blinks, and the
parameter value can be changed. Here,
Parameter No. 06 is exemplified.
※ When the Vol ▲▼ keys are pressed in the parameter mode,
the display of the parameter items shown within the following
frame can be switched:
Vol ▲ key: Switching 0C → 0d → 0L… in this order
Vol ▼ key: Switching P2xx (Ver. No.) → 06 → 0L… in this
order
Blinking
Vol ▲▼ keys