22
There are some preset stations in default setting. You can overwrite
these as you like.
Recalling a Stored Station
1. Once you have saved a station to one of the preset buttons, you can recall it by
pressing the DISPLAY button on the remote control.
2. Press the SKIP/TUNE SEARCH buttons on the unit or the remote control to
select your desired preset station number.
3. Press the DISPLAY button on the remote control to confirm the selection.
• The stored stations will be saved to the memory and will not be erased it in Standby mode.
Storing a new station into a preset location will erase the previously stored station in that
location.
• While the unit is in Standby mode, tap and hold the
/MENU/INFO icon on the unit or
press and hold the /MENU/INFO on the remote control to erase all preset memory and
restore the unit to factory setting (expect the default setting).
FM Display Modes
Every time you press the /MENU/INFO button, the display will cycle through the following
display modes: Audio Mode, Frequency, Signal Strength.
Audio Mode
When in FM mode, the display will show if the
station being received is in mono or stereo.
The receiver will automatically switch between
Stereo and Mono in Auto mode selected. You
can however override this function, so that you
can manually switch to Mono mode, which is
helpful if you’re listening to a poor FM signal.
Signal Strength
The display will show a slide bar to indicate
the signal strength, the stronger the signal, the
longer the bar will be from left to right.
Frequency
This shows the frequency of the current station.
Audio Mode
Signal Strength
Frequency
SHFJMC11_IB_RC_130621_candice.indd 22
21/06/2013 2:35 PM
