18
DAB Operation
Before switching your unit on, please fully extend the aerial.
Switch the mains switch to on position and then press the ON/OFF
button is pressed to
turn the unit to ON mode. The first time you do this, the unit will automatically enter into
DAB mode and perform a quick auto scan function. During the scan the display will show
“Searching…” together with a slide bar that indicates the progress of the scan and the
amount of stations that have been found so far.
Once the scan has finished, the unit will select the first alphanumerically found station. To
switch the found stations, press the SKIP/TUNE/SEARCH buttons on the unit or the
remote control.
Full Scan
The full scan will search for the entire DAB Band III channels. After the scan has finished, the
first alphanumerically found station will be automatically selected.
1. To activate auto scan, first tap the
/SCAN icon on the unit or press the
/SCAN
button on the remote control to select “Autotune Full Scan”, the display will show
“Searching …” and a progressing slide bar.
2. All the stations that have been found will be stored automatically. To explore and
select listening to the found stations, press the SKIP/TUNE/SEARCH on the unit
or the remote control to select.
Manual Tuning
You can manually tune the receiver. This can help you when aligning your aerial or when
adding stations that were missed while auto tuning.
1. Press and hold the SELECT/MONO/ST. button on the remote control to enter manual
tuning mode. The display will show “Manual Tune”, and then display the current
stations frequency.
2. Press the SKIP/TUNE/SEARCH buttons on the unit or the remote control to
cycle through the DAB channels, which are numbered from 5A to 13F.
3. After your desired channel number is selected, press the SELECT/MONO/ST. button
on the remote control to confirm. The display will show the multiplex.
4. If you wish to exit Manual Tuning mode, press the SELECT/MONO/ST. button on the
remote control.
Secondary Services
You may see a “>” symbol after the name of the station, this indicates that there are
secondary services available to that station. These secondary services contain extra
services that are related to the primary station. e.g. a sports station may want to add extra
commentaries. The secondary services are inserted directly after the primary station in the
station list.
To select the secondary station, press the SELECT/MONO/ST. button on the remote control.
When the secondary service ends, the unit will automatically switch back to the primary
station.
SHFJMC11_IB_RC_130621_candice.indd 18
21/06/2013 2:35 PM
