17
9. Press the TIMER button on the remote control again, the display will show “the Volume
level ” and flash. Press the SKIP/TUNE/SEARCH buttons on the remote control
to adjust the volume. Press the TIMER button on the remote control to confirm.
10. The Timer setting is now complete.
To check the timer setting, press the TIMER button repeatedly on the unit or the remote
control until the display shows “on timer” and “off timer” settings.
To Cancel the Daily Timer (Remote Control Only)
In Standby mode, press the Timer button on the remote control repeatedly to select Timer
Off mode. The “ ” icon will disappear from the display.
Setting the Sleep Timer (Remote Control Only)
Use the sleep timer to turn the system off after a certain number of minutes in play mode.
By setting the sleep timer, you can fall asleep to music and know that your system will
restore to off mode by itself rather than play all night.
1. In POWER ON mode, press the SLEEP button on the remote control repeatedly to
set the sleep timer. It changes the number of minutes shown on the display in this
sequence:
SLEEP-90
SLEEP-80
OFF
SLEEP-10
SLEEP-20
SLEEP-30
SLEEP-40
SLEEP-70
SLEEP-60
SLEEP-50
2. The system will return to Standby mode after the number of minutes you have set.
The display will show “SLEEP #”.
3. To cancel the sleep timer, press the SLEEP button on the remote control repeatedly
until the “SLEEP-OFF” indicator shows on the display, and “SLEEP #” disappears from
the display.
EQ Control (Remote Control Only)
This system supports a variety of equalizers and sound effects.
During playback, press the EQ button on the remote control to select a desired music
mode. Each time the EQ button is pressed, the music mode will change to the next one as
follows:
FLAT
POP
CLASSIC
ROCK
JAZZ
SHFJMC11_IB_RC_130621_candice.indd 17
21/06/2013 2:35 PM
