15
General Operation
Powering ON/OFF
Connect the unit to the mains socket. Switch the mains switch at the rear side of the unit to
the ON position. The unit will be in standby mode and the standby indicator will illuminate.
• Press the ON/OFF
button on the unit or the remote control to switch the unit to ON
mode.
• Press the ON/OFF
button on the unit or the remote control in ON mode to switch the
unit back to Standby mode.
• Switch the mains switch at the rear of the unit to the off position, or disconnect the
mains plug from the mains socket if you want to switch the unit off completely.
Selecting Modes
• Tap the MODE icon on the unit or press the MODE button on the remote control
repeatedly to switch between CD, iPod, USB and CARD modes.
• Tap the FUNCTION icon on the unit or press the FUNCTION button on the remote
control repeatedly to switch between DAB, FM and AUX modes.
• The selected mode will show on the display.
• If there is no signal under the CD, USB or Card mode or no iPhone/iPod docked during
iPod mode, the unit will automatically switch to Standby mode in about 15 minutes.
• During Standby mode, press any buttons to light up the display for approx. 10 seconds.
• Please turn the unit off completely to save energy when not using it.
Adjusting the Volume
Press the /– buttons on the unit or the remote control to adjust the volume to
the desired level.
Mute Function (Remote Control Only)
Press the MUTE button on the remote control to temporarily stop the speakers emitting
sound. The display will show “MUTE” . To cancel mute and restore the sound, press the
MUTE button again or press the /– buttons on the unit or the remote control.
Auto Setting the Clock
When you first turn on your radio it will automatically set the time by searching out the DAB
signal. It will continue to search for the time while in DAB mode until it has managed to set
the time.
SHFJMC11_IB_RC_130621_candice.indd 15
21/06/2013 2:35 PM
