16
Manual Setting the Clock
Connect the unit to the mains socket. Switch the mains switch at the rear side of the unit
to ON position. The unit will be in Standby mode, and the display will show “00 : 00 : 00”.
The unit will scan the time automatically. If the time is not updated, please set the clock
manually.
1. During Standby mode, press and hold the DISPLAY button on the remote control
until the 12/24 hour digits flash on the display.
2. Tap the SKIP/TUNE/SEARCH icons on the unit or press the SKIP/TUNE/SEARCH
buttons on the remote control to switch 12 or 24 hour format, then press
DISPLAY button to confirm. The hour digits will flash on the display.
3. Tap the SKIP/TUNE/SEARCH icons on the unit or press the SKIP/TUNE/SEARCH
buttons on the remote control to adjust the hour digits, and then press the
DISPLAY button on the unit or the remote control to confirm. The minute digits will
flash on the display.
4. Tap the SKIP/TUNE/SEARCH icons on the unit or press the SKIP/TUNE/SEARCH
buttons on the remote control to adjust the minute digits, and then press the
DISPLAY button on the unit or the remote control to confirm. The clock setting is now
complete.
Clock Display
Press the CLOCK DISP button on the remote control to display the current time. It will
display for approx. 10 seconds and then return to the previous display.
Settings the Daily Timer (Remote Control Only)
1. Press the TIMER button on the remote control repeatedly to select the Timer On
mode. The “ ” icon will show on the display to indicate that the timer is on.
2. During Timer On mode, press and hold the TIMER button on the remote control until
the display shows “On Timer”, and the hour digits flash.
3. Press the SKIP/TUNE/SEARCH buttons on the remote control to adjust the hour
digits, and then press the TIMER button on the remote control to confirm. The minute
digits will flash on the display.
4. Press the SKIP/TUNE/SEARCH buttons on the remote control to adjust the
minute digits, and then press the TIMER button on the remote control to confirm.
5. After Timer On is set, the display will show “Off Timer” and the hour digits will flash.
6. Press the SKIP/TUNE/SEARCH buttons on the remote control to adjust the hour
digits, and then press the TIMER button on the remote control to confirm. The minute
digits will flash on the display.
7. Press the SKIP/TUNE/SEARCH buttons on the remote control to adjust the
minute digits, and then press the TIMER button on the remote control to confirm.
8. Finally press the SKIP/TUNE/SEARCH buttons on the remote control to select
FM, CD, iPod, USB, CARD or DAB mode, and then press the TIMER button on the
remote control to confirm.
SHFJMC11_IB_RC_130621_candice.indd 16
21/06/2013 2:35 PM
