10
Although the appliance has a power switch, a single pole switch with a minimum gap of
3 mm between contacts and adequate for the total current must be fitted between the
appliance and the mains, in compliance with national regulations.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction concerning use of the appliance by a
person responsible for their safety. Children must be supervised to ensure that they do
not play with the product.
Children must be supervised to ensure that they do not play with the product.
Before carrying out any maintenance or cleaning operations, always disconnect the
hood from the mains.
When replacing bulbs always use bulbs of the same type and power, never more
powerful.
If the cleaning operations are not done respecting the instructions indicated in
« OPERATION AND MAINTENANCE », there is risk of fire.
THE MANUFACTURER WILL NOT BE HELD LIABLE FOR DAMAGES TO PEOPLE
AND/OR PROPERTY DUE TO NON-COMPLIANCE WITH THESE WARNINGS.
2. INSTALLATION
The assembly and electrical connections should be carried out by a qualified technician.
2.1.- Electrical connection
The unit is of the double insulated
, therefore does not require an earth
connection.
Make sure the mains voltage and frequency coincide with those on the characteristics
plate on the hood and the remote extraction unit.
The electrical connection must be carried out as follows:
Brown = L (Line)
Blue = N (Neutral)
Although this is a device with a switch, When installing the hood, it is advisable to fit it in
such a manner that the mains plug is accessible by the user.
(Fig.2)
In case of direct connection to the mains, the installer has a connection card inside of
connection box.
2.2.- Fastening the hood
The hood must be centred with respect to the cooking surface, at a minimum height of
650 mm.
