S&C SpeedNet ME Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 52

S&C SpeedNet ME Скачать руководство пользователя страница 46

46 S&C Instruction Sheet 1074-530

SpeedNet Client Tool

Statistics Window,

Ethernet Tab

Figure 68. Ethernet statistics window.

The

Statistics

window has several tabs that provide statistical information regarding

interface traffic, protocol data, and routing. This section contains descriptions of each
statistic that is available through the SpeedNet Client Tool.

The

Ethernet

tab, shown in Figure 68, provides the following statistical information

regarding performance of the SpeedNet ME Radio’s Ethernet interface.
•

Bytes received

—This is the total number of bytes received by the SpeedNet ME Radio’s

Ethernet interface. The bytes received, together with the bytes sent, represent the total
data transfer of all communications links involving the Ethernet interface.

•

Unicast frames received

—This is the total net interface.

•

Non-Unicast frames received

—Total number of non-unicast frames sent to the

SpeedNet ME Radio’s Ethernet interface.

•

Receive errors

—This is the total number of receive errors.

•

Received frames dropped

—This is the total number of frames received by the

SpeedNet ME Radio’s Ethernet interface that were discarded.

•

Unknown protocol received

—This is the total number of frames received by the

SpeedNet ME Radio’s Ethernet interface with unidentified protocol errors.

•

Bytes sent

—This is the total number of bytes sent by the SpeedNet ME Radio’s Eth-

ernet interface.

•

Unicast frames sent

—This is the total number of single destination (unicast) frames

sent from the SpeedNet ME Radio’s Ethernet interface.

•

Non-Unicast frames sent

—This is the total number of non-unicast frames sent from the

SpeedNet ME Radio’s Ethernet interface.

•

Transmit errors

—This is the total number of transmit errors. This error is received

from the application device and may indicate a problem with the IntelliRupter fault
interrupter.

•

Transmit frames dropped

—This is the total number of frames transmitted and then

discarded. This error is received from the application device and may indicate a problem
with the IntelliRupter fault interrupter.

•

Output queue length

—This is the error received from the application device that

may indicate a problem with the IntelliRupter fault interrupter.

«
...
44
45
46
47
48
...
»

Содержание SpeedNet ME





















































Отзывы:

Нет отзывов