manualshive.com logo in svg

S&C SpeedNet ME, Настройка, Страница: 28 / 52

Поделиться
Скачать
S&C SpeedNet ME Скачать руководство пользователя страница 28

28    S&C Instruction Sheet 1074-530

SpeedNet Client Tool

Main Window

Figure 50. SpeedNet Client Main window.

The 

Login

 button submitted the username and password supplied to the radio specified 

by the IP address and causes the client tool to fetch the configuration information from 
the radio. Further transactions through the client tool tabs use this same information (IP 
address, username and password) to get and set data in the radio. Note that “logging in” 
from the client tool does not produce a persistent session or state change in the specified 
radio. Further, logging in from one client tool does not preclude logging in from other 
client tools on other PCs, provided they also have the valid login information (IP address, 
username and password). See Figure 50.
•  The display in the upper-right corner of the 

Main

 window, see Figure 50, shows the 

Location, the Radio ID (node name), Radio IP address, Radio Status, and user’s security 
access level.

•  SNMP Timeout

—The SNMP protocol automatically resends control data after a period 

of time. The 

SNMP Timeout 

control is used to adjust the timeout value. In the case of 

a busy network and/or when traversing many wireless hops, you may wish to increase 
the SNMP timeout. The default value will work in most situations.

•  Connect To

—The 

Connect To…

 button allows you to connect to a different SpeedNet 

ME Radio by opening the SpeedNet ME Radio 

Login

 window. Other configuration 

functions are accessed by clicking on the appropriate tabs, as follows:

• Interfaces

—The Interfaces page is used to configure the Ethernet, wireless, and serial 

interfaces.

•  IP Routing

—The IP Routing page is used to configure the routing settings for the 

wireless network, including the use of mesh networking or static routes. 

• Security

—The Security page is used to configure wireless network encryption and 

view the MAC Address Revocation list.

• Admin

—The Admin page is used to assign the Radio ID (radio node name), upload 

security and network configuration files, reboot the radio, and install new radio 
firmware.

• Statistics

—This window provides detailed information regarding radio performance.

Содержание SpeedNet ME





















































Отзывы:

Нет отзывов