S&C SpeedNet ME Скачать руководство пользователя страница 27 | Manualshive

Страница: 27 / 52

S&C SpeedNet ME Скачать руководство пользователя страница 27

S&C Instruction Sheet 1074-530

27

SpeedNet Client Tool

Overview

The configuration and management of a SpeedNet ME Radio network is achieved
using the SpeedNet ME Radio Client Tool application and the IntelliTeam

®

CNMS

Communication Management System. The Client Tool, based on the Simple Network
Management Protocol (SNMP), provides a secure method for viewing or modifying
SpeedNet ME Radio configuration parameters. The Client Tool can also update SpeedNet
ME Radio firmware.

Logging In

Follow these steps to log in to the SpeedNet Client Tool:

STEP 1.

Launch the SpeedNet Client Tool, and the Login page will open.

STEP 2.

In the IP Address field, enter the IP address of the SpeedNet ME Radio’s Ethernet
interface; the default is 192.168.200.1. When the radio mesh has been configured, you
can also log in using the wireless IP address. When logging into a SpeedNet ME
Radio for the first time after a factory reset, the user name will be initial and the
factory password will be the radio’s unique MAC address listed as MAC ID on the
radio label. The MAC address must be entered with all lowercase characters and
without any separators (for example: 00c919eea1b2). The login window and label
are shown in Figures 48 and 49. As shipped from S&C, SpeedNet ME Radios are
configured using a standard SAD file, which includes a default username and
password. Contact S&C to obtain these credentials.

Figure 48. SpeedNet Login dialog box.

Figure 49. SpeedNet ME Radio MAC address label.

STEP 3.

After entering the appropriate login information, click the

Login

button to connect

to the SpeedNet ME Radio. The

Main

window will be displayed. See Figure 50 on

page 28.

«
...
25
26
27
28
29
...
»

Содержание SpeedNet ME





















































Отзывы:

Нет отзывов