S&C Instruction Sheet 1074-530
43
SpeedNet Client Tool
Admin Window,
System Tab
Figure 65. System admin configuration window.
The
Admin
window has tabs that can be used to perform administrative tasks for the
SpeedNet ME Radio that include upgrading firmware and determining system information.
Selecting a tab will provide a list of configurable options.
The
System
tab, shown in Figure 65, is used to view system information, such as the
current firmware version. System information, including radio ID and location, can be
entered by the administrator. The following parameters can be configured:
•
MIB_Version
—This read-only field provides information regarding the current
Management Information Base (MIB) that is being used by the SNMP protocol.
•
Firmware_Version
—This read-only field displays the current firmware version that
is installed on the SpeedNet ME Radio.
•
Running Time
—This read-only field displays the elapsed time since the last time the
SpeedNet ME Radio was rebooted.
•
SpeedNet Radio ID
—This field can be used by administrators to assign a descriptive
name to the SpeedNet ME Radio. The SpeedNet ME Radio ID must consist of ASCII
values but cannot contain spaces or the following characters: $, ^, &, (, or ).
•
System Name
—This field can be used by Administrators to assign a descriptive name
to the entire network. The System ID must consist of ASCII values.
•
System Location
—This field can be used by administrators to note the loca-
tion of the network. The System ID Location must consist of ASCII values. The
convention for location is for the system location to be in the form <signed
decimal latitude>:<signed decimal longitude>. For example, a system location of
33.578014746144: -101.865234375
is in Lubbock, Texas USA.
•
System Contact
—This field can be used by administrators to list the point of contact
for the SpeedNet ME Radio network. The System ID must consist of ASCII values.
•
Apply
—Saves changes made to the configuration of the
System
tab. Changes will not
be saved if you change to a different configuration tab without first clicking the
Apply
button.
•
Reboot
—Clicking the
Reboot
button will cause the SpeedNet ME Radio to reboot.
