22 S&C Instruction Sheet 1074-530
Network Configuration
Figure 40. Network Configuration of the Wireless Interface.
Figure 40 shows the network configuration window for the Wireless Interface. The
IP Address
,
Subnet Mask
,
Network ID
,
Link-level Retries
,
Analog Interference
Detection
,
and Threshold and Transmit Power settings function the same as in the
corresponding SpeedNet Client window as described in the “Interfaces Window,
Wireless Tab” section starting on page 30. There is no
Apply
button on this window because
application to a radio is deferred until uploaded using the SpeedNet Client tool.
Please note that on a given SpeedNet ME Radio mesh, all the wireless interfaces of
the radios should be on the same subnet but should use different individual addresses
on that subnet.
