S&C 6800 Series, Инструкция

Страница: 25 / 40

S&C Instruction Sheet 1045-510 25
Installation
Figure 23. Switch Interface Connectors on Pad-mounted Switch Controls.
1. For switch controls that use ac control power, energize the ac power.
2. Check the AC ON and CHG ON LEDs.
When you insert the 10-A AC Line fuse, the red AC ON and CHG ON LEDs should
illuminate. See Figure 21 on page 23.
If the AC ON and CHG ON LEDs do not illuminate, check the external ac voltage
source (if applicable). The ac test points are located on the terminal strip at the ac
fuse housing. See Figure 19 on page 22. If ac control power is present, go to S&C
Instruction Sheet 1045-550.
Add Ac Power
and Test