Page 42/67
Select triggering image
Press [Menu] key to select among the 16 images. The selected image will record
when alarm is triggered. Move cursor to select image and press [Menu] to activate channel image.
Buzzer
Press [Menu] to activate buzzer. The buzzer will send alert if alarm occurs when it is activated.
Upload alarm
Upload the alarm image to remote host. (Available when management host is connected.)
The
time of image upload depends on the time of alarm upload.
Alarm out
Select alarm output number which will be set.
Prerecord time
Set the time of recording before alarm is triggered. Press numerical keys to enter time. The
images before alarm will be saved as alarm recording according to preset time. If “Recording time before alarm” is “0”,
the system won’t enter pre-alarm state, i.e. the period before alarm won’t be recorded.
Post record time
Set the time of recording after alarm is triggered. Press numerical keys to enter time. The alarm
recording after alarm is triggered is saved.
Alarm output time
Output time of alarm signals. Alarm should be connected to the recorder.
