Page 27/67
Draw Upper Boundary
: Move the active zone onto the upper line of the rectangle; Press [
↑
] and
[
↓
] key to move
the upper and bottom line then enlarge or reduce the mask zone size.
Draw Bottom Boundary:
Move the active zone onto the bottom line of the rectangle; Press [
↑
] and
[
↓
] key to
move the upper and bottom line
Draw Left Boundary:
Move the active zone onto the left line of the rectangle; Press
[
←
]
,
and
[
→
] key to move
the left and right line.
Draw Right Boundary:
Move the active zone onto the right line of the rectangle; Press
[
←
]
,
and
[
→
] key to
move the left and right line.
While all boarding lines arrive at proper position, press the menu key on front panel to confirm mask area, then
back to live configuration menu.
Change the direction of the boundary line (red line): enter the mask zone, red line is at left boundary. Press [
↑
] and
[
↓
] to move the red line up and down to boundary line. There are two methods to move the active area to right
boundary line, as below:
Method one Press
[
↑
] to move red line to upper boundary, then press
[
→
] to move to right boundary.
Method two Press
[
↓
] to move red line to bottom boundary, then press
[
→
] to move to right boundary.
Step 3: Copy channel
You may copy the contents of area mask setting to another channel or all channels. Select a channel in “Copy
setting to” and click "Copy” button. Repeat step 1 and 2 if the areas of other channels are different.
Step 4: Save
After the area mask setting of all channels, click “OK” button in “Live Config” menu to save and exit.
5.2.3 Video Mask Setting
While the camera of some channel is masked, it can use this channel or other channel to prerecord or alarm record
