Page 29/67
Move cursor to “Alarm” and press [Menu] key to enter.
The interface of video loss processing is same to video
mask interface. (Refer to: Alarm processing in this manual)
Step 4: Save and Activate
After the video loss processing setting of all channels, click “OK” button in “Live Config” menu to save and exit.
5.2.5
Motion detection
In monitoring status, it can detect removable objects through analysis of the video. It detect whether the monitoring
scene is changed, if it changes, user can deal with it according to setting this function. Motion detection works by
analysis the video pixel changes. Light change or big video signal interference will also be regarded as monitoring object
moving, which will affect the correct detection. So it needs to set the parameter considering all the aspects, and try to get
the best effect.
Step 1: Select channel
Enter “Live Config” interface. Move cursor to “Channel” to select the image to perform motion detection setting.
Press [Menu] to confirm.
Step 2: Activate motion detection
Press [Menu] key to select “Motion detection” to activate mask alarm.
Step 3: Set sensitivity
Move cursor to “Sensitivity”. Five options (level 1-5) are available, lowest<lower<normal<high<highest. You can
customize the settings. If the sensitivity is low, the motion detection alarm will be activated only when the change of
scene is obvious; if the sensitivity is high, the motion detection alarm will be activated when the scene changes slightly.
Step 4: Set motion detection area
