23
•
STC Curve
The following drawings show the curve between Distance to Gain
shown as the following drawings.
You must set the figures considering the reflected wave on surface of
the sea
②③a③④② ca④②ed by an③enna
s installation location.
On average, antenna is installed at the height of 5m, when wave s
height is at 1m, the setted value must be at Curve 1.
2~4, is when wave height at 2~4m, where reflected wave on surface
of the sea is severe.
If antenna s at height of 10m and wave at 1m, the curve must be set
as 2.
24
Chapter 3. How to operate the unit
3.1 General Idea
3.1.1 Power input and Operation
1. Power input
To power on, press POWER button.
After power on, Count Down Timer is displayed on SAMYUNG Logo screen,
it will be on stand-by status in 1 min. 30 secs.
As the TX time is consolidated and displayed, user may judge the ideal time
for repair..
It indicates the version of the program.
[Refer] When unit does not turn off due to programme failure,
Please push OFF switch for 10 seconds so that you may shut it down
by force.
2. TX
Press
button to enable the transmission at the stand-by status.
Press
button again to convert the TX status to the stand-by status.
3.1.2 Tuning control
It is required to control the tuning of the unit both manually and automatically.
The conversion is selectable in the setup of MENU.
For the automatic tuning
,
Auto Tuning
i② di②played nex③ ③o ③he ③④n
ing bar.
1. Change tuning mode
Menu
System
Tuning
Auto / Manual
Input
Return
2. Control tuning volume
In case of tha manual tuning mode, turn the volume to adjust to the biggest
image.
Adjust to the maximum movement of the tuning bar.
In case of the automatic tuning mode, it is needless to turn the volume.
If
image doe②n ③ appea①, adj④②③ ③he
volume again or turn the volume of
/
(rain/snow) removal.