33
3. Measurement of the distance and bearing by using F EBL/VRM
Press the F EBL/VRM key.
EBL/VRM will appear on the radar screen.
Once the cursor is appeared, move to the desired position.
By pressing Center Movement key, the center of F EBL/VRM will be shifted and
will be back to the original position by repressing the key.
By pressing cursor, cursor will be disappeared and then use the direction key
to move EBL/VRM to the desired position.
The value of distance and bearing will appear on the bottom end of the
screen..
To exit, press the Esc key.
[Ref] F EBL/VRM may be used to indicate EBL/VRM on the specified position.
4. Measurement of the distance and bearing by using Cursor
By using Cursor, cross shaped cursor will be appeared on the radar screen.
The value of distance and bearing will appear at the bottom end of the
screen,where the cursor is located.
3.3.14 To change the distance unit
1. NM (Nautical Mile)
Menu
System
Distance unit
Input
NM
Input
Esc
Cursor, VRM, Distance of parallel line represents NM.
2. Mile
Menu
Sytem
Distance unit
Input
Mi
Input
Esc
Cursor, VRM, Distance of parallel line represents Mi
3. Kilometer (Km)
Menu
System
Distance unit
Input
KM
Input
Esc
Cursor, VRM, Distance of parallel line represents KM.
34
3.3.15 To change the way of direction symbol
1. Indication of ship s head line (H-UP)
Menu
Indication
Mode
Input
Head
Input
Esc
Ship s head is displayed to the HEAD UP.
If ship s head is changed, ECHO image bearing on the screen is also
changed.
If you could not obtain bearing reference from external navigation
equipment like Gyro Compass, it sets out with this bearing display.
Image moves to the left.
When the own ship turn right to
45 degree
