Settings
242
If there are access points defined, to create a new
access point, select
Options
→
New access point
and
select:
•
Use default settings
to use the default settings. Make
the needed changes and press the
Back
soft key to
save the settings.
•
Use existing settings
to use existing setting
information as the basis for the new access point
settings. A list of existing access points is opened.
Select one. Access point settings are opened with
some fields already filled.
Fill in the following fields:
Notes
:
• Begin filling in the settings from the top because depending
on what data connection you select (
Bearer type
), only
certain setting fields are available.
• Follow the instructions given to you by your service provider
very carefully.
•
Connection name
: Enter a descriptive name for the
connection.
•
Data bearer
: The options are
GPRS
and
Data call
.
Depending on what data connection you select, only
certain setting fields are available. Fill in all fields
marked with
Must be defined
or with a red asterisk.
Other fields can be left empty, unless you have been
instructed otherwise by your service provider.
Note
: To be able to use a data connection, the network
service provider must support this feature, and if
necessary, activate it for your SIM card.