36
SYSTEM MAINTENANCE
ALARMS
The OfficeServ 100, OfficeServ 500, and OfficeServ 7000 systems provide a feature
that self-checks for any failures. If a failure does occur in the software or hardware,
a fault error will be generated and buffered to an alarm report. During an alarm
state every phone with an assigned
SYSTEM ALARM
button will ring and cause
the
SYSTEM ALARM
button to flash amber. A phone with a display should be
used so that the alarm information can be viewed. When an alarm occurs, the user
can press the
SYSTEM ALARM
button to view and scroll through the alarms. This
will silence the audible part of the alarm, but the
SYSTEM ALARM
button will
continue to flash until your Service Company views and clears the alarms in the
alarm report located in the system software.
sys_screen.qxp 5/11/2006 6:27 PM Page 43
N O T E S
sys_screen.qxp 5/11/2006 6:27 PM Page 44
