22
iDCS KEYSETS
DS 5000 SERIES KEYSETS
Open customer programming and follow the instructions below.
ACTION
DISPLAY
1. Press
TRSF
and then dial
105
[201] SPEED DIAL
Display shows
00 :
2. Dial the station number (e.g.,
205
) OR
[205] SPEED DIAL
press
UP
or
DOWN
to select the station
00 :
and press the right soft key to move the
cursor OR press the left soft key to go
to step 4
3. If the selected station has no speed dial
[205] SPEED DIAL
bins, this display will be shown and a new
SPDBLK NOT EXIST
station may be selected
A
C
E
Transfer
Speaker
VOLUME
B
D
F
28D KEYSET, 18D KEYSET
PROGRAMMABLE KEYS LAYOUT
8D KEYSET PROGRAMMABLE
KEYS LAYOUT
Transfer Speaker
A
B
C
D
E
F
7S KEYSET PROGRAMMABLE
KEYS LAYOUT
C
A
B
D
E
F
14D KEYSET PROGRAMMABLE
KEYS LAYOUT
C
A
B
D
E
F
21D KEYSET PROGRAMMABLE
KEYS LAYOUT
C
A
B
D
E
F
sys_screen.qxp 5/11/2006 6:26 PM Page 29
23
4. Dial the location number (e.g.,
05
) OR
[205] SPEED DIAL
press
UP
or
DOWN
to select the location
05: _
and press the right soft key to move the
cursor OR press the left soft key to return
to step 2
5. Enter the trunk access code (e.g.,
9
)
[205] SPEED DIAL
followed by the number to be dialed
05 : 9-4264100_
(e.g.,
4264100
) OR press the right
soft key to return to step 2 OR press the
left soft key to return to step 3 OR press
HOLD
to clear an entry (if an error is made,
use the
DOWN
key to step back)
6. Press the
F
key to access
Program Station
Speed Dial Names
OR press
TRSF
to save
and exit programming OR press
SPK
to save
and advance to the next program
DEFAULT DATA: NO SPEED DIAL NUMBERS PROGRAMMED
PROGRAM PERSONAL SPEED DIAL NAMES
FOR OTHER STATIONS
Each individual station user can program his/her own names but in cases where it
is impractical or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial names. The station speed
dial codes are 00–49. Each station begins with ten numbers (00–09) and can be
assigned more in blocks of ten up to a maximum of fifty numbers.
PROGRAM KEYS
UP
&
DOWN
- Used to scroll through extension numbers and speed dial bins.
KEYPAD
- Used to enter selections.
SOFT KEYS
- Move cursor left and right.
SPK
- Used to store data and advance to next program.
HOLD
- Used to clear previous entry.
ANS/RLS
- Used to select ALL.
ACTION
DISPLAY
1. Press
TRSF
and then dial
106
[201] SPEED NAME
Display shows
00:
sys_screen.qxp 5/11/2006 6:26 PM Page 30
