20
4. Press the
F
key to toggle to
Program
SYS SPEED NAME
System Speed Dial Names
, step 3 to
505:
enter the name
5. Press
TRSF
to store and exit
programming OR press
SPK
to store
and advance to the next program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
PROGRAM SYSTEM SPEED DIAL NAMES
This program is used to assign a character name or identification for each system
speed dial location. This name enables you to locate the speed dial number when
you are using the directory dial feature.You may assign a name 11 characters long.
PROGRAM KEYS
UP
&
DOWN
- Used to scroll through speed dial bins.
KEYPAD
- Used to enter selections.
SOFT KEYS
- Move cursor left and right.
SPK
- Used to store data and advance to next program.
HOLD
- Used to clear previous entry.
ACTION
DISPLAY
1. Press
TRSF
and then
706
SYS SPEED NAME
Display shows the first name
500:
2. Dial the system speed number (e.g.,
505
)
SYS SPEED NAME
OR press
UP
or
DOWN
to select the entry
505:
number and press the right soft key to
move the cursor
3. Enter the name as shown in
Program
SYS SPEED NAME
Station Names
and press the right soft
505:SAMSUNG
key to return to step 2 OR press the
F
key to toggle to the speed dial number
to return to
Program System Speed Dial
Numbers
, step 4
4. Press the right soft key to return to step 2
above OR press
TRSF
to store and exit
programming OR press
SPK
to store and
advance to the next program
sys_screen.qxp 5/11/2006 6:26 PM Page 27
21
PROGRAM PERSONAL SPEED DIAL
NUMBERS FOR OTHER STATIONS
Individual station users can program their own numbers, but in cases where this is
not practical, or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial numbers. The station
speed dial codes are 00–49 or 000–049. Each station begins with ten numbers
(00–09) and can be assigned more in blocks of ten (up to a maximum of fifty num-
bers).
Each speed dial number consists of a line access code and the telephone number
to be dialed. The access code can be any line group, individual line, station group
or individual extension. The speed dial number can be up to 24 characters long
including
,
,
#
,
FLASH
and
PAUSE
.
NOTE: If Least Cost Routing (LCR) is used, the LCR access code must be entered.
When you are entering a speed dial number, there are some special keys that you
will need to use. These are the bottom row of programmable keys on the LCD 12B
and LCD 24B keysets and are known as keys
A
,
B
,
C
,
D
,
E
and
F
.
PROGRAM KEYS
UP
&
DOWN
- Scrolls through extension numbers and speed dial bins.
KEYPAD
- Used to enter number.
HOLD
- Press to clear entry.
A
- Does not have a function.
B
- Inserts a FLASH.
C
- Inserts a PAUSE.
D
- Changes the dialing type from pulse to tone.
E
- Hides and displays digits.
F
- Changes display to speed dial name entry.
DCS KEYSETS
A
B
C
D
E
F
12 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
A
B
C
D
E
F
24 BUTTON KEYSET
PROGRAMMABLE KEYS LAYOUT
sys_screen.qxp 5/11/2006 6:26 PM Page 28
