Samsung NP10 Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 96

background image

viii Users Manual

The FCC has set a general guideline of 20 cm (8 inches) separation between the device
and the body, for use of a wireless device near the body (this does not include
extremities). This device should be used more than 20 cm (8 inches) from the body
when wireless devices are on. The power output of the wireless device (or devices),
which may be embedded in your notebook, is well below the RF exposure limits as set
by the FCC.
This transmitter must not be collocated or operate in conjunction with any other
antenna or transmitter.
Operation of this device is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation of the device.

Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Contact
manufacturer for service.

FCC Statement for Wireless LAN use:

“While installing and operating this transmitter and antenna combination the
radio frequency exposure limit of 1mW/cm2 may be exceeded at distances
close to the antenna installed. Therefore, the user must maintain a minimum
distance of 20cm from the antenna at all times. This device can not be
colocated with another transmitter and transmitting antenna.”

FCC Part 68

This equipment compiles with part of the FCC rules. On the back of this equipment is
a label that contains, among other information, the FCC registration number and ringer
equivalence number (REN) for this equipment. If requested, this information must be
provided to the telephone company.
This equipment uses the following USOC jacks : RJ11C
An FCC compliant telephone cord and modular plug is provided with this equipment.
This equipment is designed to be connected to the telephone network or promises
wiring using a compatible modular jack which is Part 68 compliant. See Installation
Instructions for details.
The REN is used to determine the quantity of devices which may be connected to
telephone line. Excessive RENs on the telephone line may result in the devices not
ringing in response to an incoming call. In most, but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by total RENs, contact the local telephone company
to determine the maximum REN for the calling area.

Notice and Safety With Wireless - English V1.1.fm Page viii Monday, June 17, 2002 3:33 PM

«
...
6
7
8
9
10
...
»

Содержание NP10

































































































Отзывы:

Нет отзывов

Похожие инструкции для NP10

Бренд: chiliGREEN Страницы: 43

Бренд: UNYKAch Страницы: 2

Бренд: Barbie Страницы: 45

Lifebook S7000 Series

Бренд: Fujitsu Страницы: 70

Бренд: Fujitsu Страницы: 41

Бренд: Fujitsu Страницы: 128

Бренд: Fujitsu Страницы: 385

Бренд: Fujitsu Страницы: 393

LifeBook S7110D

Бренд: Fujitsu Страницы: 43

Бренд: Asus Страницы: 30

Бренд: Asus Страницы: 72

1015PEM-PU17-BK

Бренд: Asus Страницы: 61

Бренд: Asus Страницы: 110

Бренд: Asus Страницы: 62

Бренд: Asus Страницы: 102

Бренд: Asus Страницы: 64

Бренд: Asus Страницы: 120

Бренд: Asus Страницы: 66

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды