Settings
Picture
Settings
Picture
piCturE
You can configure various display options such as the
[Screen resolution]
,
[HDMI aspect ratio]
, etc.
Screen resolution
This allows you to set the output resolution of the video signal. The number indicates the number of lines of
video per frame. The i and p indicate interlaced and progressive scan, respectively. The more lines, the higher
quality.
3D mode
This allows setting of 3D mode if the service selected
provides 3D signal.
Select
[Auto]
to enable 3D mode if mode is recognized
from the signal.
Select
[Off]
to disable 3D mode.
If 3D mode is not recognized automatically although
service is in the 3D format, you can force this mode
manually:
-
[SBS-3D]
: Convert SIDE-BY-SIDE 3D format to the 3D
view
-
[SBS-2D]
: Convert SIDE-BY-SIDE 3D format to the 2D
view
-
[TB-3D]
: Convert TOP-BOTTOM 3D format to the 3D view
-
[TB-2D]
: Convert TOP-BOTTOM 3D format to the 2D view
\
If you use one of the forced 3D formats (not Auto) you should remember to set 3D mode to
[Off]
or
[Auto]
when you change channel, because standard 2D channels will not display correctly.
Anti flicker
This allows turning on and off of the anti-flicker filter. This option may improve analogue video quality.
HDMI aspect ratio
This lets you adjust the output of the STB to the screen size of your TV when you connect them by using an
HDMI cable.
HDMI video convertion
This allows you to change the screen output type when you connect them using an HDMI cable.
HDMI aspect ratio
HDMI video convertion
4:3
Setting for how standard programs
display on a widescreen TV
[Auto], [Letter box], [Centre cut out],
[Stretch], [None]
16:9
Setting for how widescreen programs
display on a standard TV
[Auto], [Pillar box], [Centre cut out],
[Stretch], [None]
TV Scart aspect ratio
This lets you adjust the output of the STB to the screen size of your TV when you connect them by usng a TV
Scart cable.
TV Scart video conversion
This allows you to change the screen output type when you connect the TV and STB by using a Scart cable.
Screen output types are the same as the HDMI video conversion. Refer to the above table of HDMI video
conversion.
TV Scart
SCART analogue output may provide CVBS signal only or both CVBS and RGB. Generally RGB signal provides
better quality. Setting this option does not affect HDMI digital output.
Information banner timeout
This allows you to change the display time for the service information that appears at the top of the screen
when you change channels or press the
INFO
button.
Screen saver
You can set the time delay for the screen saver.
If there is no input from the remote control for a given period of time, the menu window disappears and the
screen saver is activated.
\
The screen saver is enabled only when any part of OSD is visible. It will be never shown during
watching television.
HDCP Enabled
This function allows you to either enable or disable HDCP for programs that are broadcasted without copy
protection.
But you cannot disable HDCP against the copy protected programs.
32
Содержание gx-sm550sh
Страница 92: ...Memo ...
Страница 93: ...Memo ...
