Copying
_ 59
Basic copy
This is the normal and usual procedure for copying your originals.
1.
Press
Copy
from the display screen.
2.
Place the originals face up in the DADF or place a single original face
down on the scanner glass and close the DADF (see "Loading originals"
on page 45).
3.
Adjust the settings for each copy such as
Paper Supply
,
Reduce/Enlarge
,
Duplex
and more in the
Basic
tab (see "Changing the
settings for each copy" on page 61).
4.
Set the copy features in the
Advanced
or
Image
tabs, if necessary (see
"Using special copy features" on page 65).
5.
Enter the number of copies using the numeric keypad on the control
panel, if necessary.
6.
Press
Start
from the control panel to begin copying.
•
To cancel the current copy job, press
Stop
on the control panel.
