Media and tray
_ 55
Auto tray switch
This is the option to set if the machine is to continue printing or not when
any tray becomes empty. For example, both tray 1 and tray 2 are filled with
the same size paper, the machine automatically prints from tray 2 after the
tray 1 runs out of paper.
1.
Press
Machine Setup
>
Tray Settings
>
Settings
>
Auto Tray Switch
.
2.
Press
On
.
3.
Press
to save the selection.
Auto continue
This option allows you to continue printing when the paper size you have set
is mismatched with the paper in the tray. When this option is activated, the
machine continues printing using similar or large size paper. If this option is
inactivated, the machine waits until the required size paper is loaded in the
tray.
1.
Press
Machine Setup
>
Tray Settings
>
Settings
>
Auto Continue
.
2.
Press
On
.
3.
Press
to save the selection.
Paper substitution
When the requested paper for a print job is not available in the tray, this
feature allows you to substitute similar paper size, For example, if the
requested ledger sized paper is not available in the tray, this machine
substitutes A3 for the requested paper.
When the paper is substituted, some image loss may occur.
1.
Press
Machine Setup
>
Tray Settings
>
Settings
>
Paper
Substitution
.
2.
Press
On
.
3.
Press
to save the selection.
Tray priority setting
When you do not select the tray for printing, the tray selected as in the
Tray
Priority Setting
will be used in order. If the tray does not have the paper on
which you want to print, the machine automatically prints from the trays in
the priority order set.
1.
Press
Machine Setup
>
Tray Settings
>
Settings
>
Tray Priority
Setting
.
2.
Press a tray, and give priority in the order for printing job using
UP
and
Down
.
3.
Press
to save the selection.
