Samsung AM140RNPDKH Series, Руководство по установке

Страница: 12 / 36

Leak test and insulation
2. Insulate the refrigerant pipe.
f If the pipe is not insulated correctly, condensed water may form on the surface of the pipe or product capacity may
decrease.
f Check that the curved part of the pipe is firmly covered by the insulator.
Insulator
Clamp
Liquid pipe
Gas pipe
Insulator
Fix it closely so that there is no gap.
Insulator
Indoor unit
Insulator should overlap.
Single pipe system
f
The gas pipe and liquid pipe can be attached together but make sure
that they are not excessively pressed each other.
f
When the gas pipe and liquid pipe are attached together, use 1 grade
thicker insulator.
Gas pipe
Liquid
pipe
Insulator
Insulator
Single pipe system after distribution kit
f
When installing the gas pipe and the liquid pipe, allow 10 mm of space
between the pipes.
f
When the gas pipe and liquid pipe are attached together, use 1 grade
thicker insulator.
Gas pipe
10 mm
Liquid pipe
10 mm 10 mm
t
The insulator of the pipe should not be disconnected or
cracked. Apply adhesives on the connection part of the
insulator to prevent it from getting damp.
t Cover the insulator of the refrigerant pipe with a sealing
tape if the insulator can be exposed to sunlight. (Make
sure that the thickness of the insulator is not decreased
by the sealing tape.)
t
When insulating the pipe, make sure that the thickness
of insulator on the curved part or on the part contacted
with the pipe hanger is not decreased.
t When the thickness of the insulator is decreased,
increase the thickness of the insulator by using
additional insulator.
CAUTION
Additional
insulator Hanger
Refrigerant pipe
insulator
a×3
a
ENGLISH-12