Samsung AM140RNPDKH Series, Руководство по установке

Страница: 32 / 36

Changing a specific option
You can change each digit of set option.
Option SEG1 SEG2 SEG3
Explanation Page Mode Option mode to change
Remote controller display -
Indication and Details
Indication Details Indication Details Indication Details
0 D Option mode 1~6
Option SEG4 SEG5 SEG6
Explanation
Tens digit of option SEG to
change
Unit digit of option SEG to
change
Changed value
Remote controller display
Indication and Details
Indication Details Indication Details Indication Details
Tens digit of
SEG
0~9
Unit digit of
SEG
0~9 Changed value 0~F
t
When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
t When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
Ex) When setting the ‘buzzer control’ into disuse status.
Option SEG1 SEG2 SEG3
Explanation Page Mode Option to change
Setting 0 D 2
Option SEG4 SEG5 SEG6
Explanation
Tens digit of option SEG to
change
Unit digit of option SEG to
change
Changed value
Setting 1 7 1
NOTE
t
If you are using heat pump model, mixed operation mode (two or more indoor units operating in different
operation mode simultaneously) is not available when the indoor units are connected to one outdoor unit. If you
set the master indoor unit with a remote controller, outdoor unit will operate in the mode which was set in the
master indoor unit.
CAUTION
ENGLISH-32