Samsung AM140RNPDKH Series, Руководство по установке

Страница: 21 / 36

Setting an indoor unit address and installation option
Set the indoor unit address and installation option with remote controller option.
Set the each option separately since you cannot set the ADDRESS setting and indoor unit installation setting option at the
same time. You need to set twice when setting indoor unit address and installation option.
Procedure of option setting
High Temp Button High Fan Button
Mode change
Low Temp Button
Low Fan Button
Entering mode for ooption
setting
Ooption setting mode
Step 1. Entering setting mode
1. Remove batteries from the remote controller.
2. While pressing and holding the Temp + and Temp - buttons, insert the batteries.
3. Check if you have entered the option setting stage.
Step 2. Procedure of option setting
After entering the option setting stage, select the option as shown below.
t 24 digits are available to be input for the option setting.
t
SEG1, SEG7, SEG13, and SEG19 are page option so they do not need to be set.
t Set the SEG2~SEG6, SEG8~SEG12 in 'ON' status and SEG14~18, SEG20~24 in 'OFF' status.
SEG1 SEG2 SEG3 SEG4 SEG5 SEG6 SEG7 SEG8 SEG9 SEG10 SEG11 SEG12 On(SEG1~12) Off(SEG13~24)
0 X X X X X 1 X X X X X
SEG13 SEG14 SEG15 SEG16 SEG17 SEG18 SEG19 SEG20 SEG21 SEG22 SEG23 SEG24
2 X X X X X 3 X X X X X
CAUTION
ENGLISH-21
02
INST
ALLA
TION