Selecting a location for installation
f
Select a location for installation that satisfies the following conditions and customer demands.
1. A place where air can be well distributed.
2. A place where air can pass through without any interference.
3. A place where condensed water can be well drained.
4. A place where maintenance of the product can be carried out without inconvenience.
5. A place where enough length of pipe (within the allowable length) can be installed between the indoor unit and outdoor
unit.
6. The product should be installed on even and sturdy floor.
7. The product should not be installed in a humid place such as entrance door or kitchen.
8. The product should not be exposed to the sunlight. (If necessary, place a sunshade for the product.)
- Otherwise, the surface of the product may discolor due to the direct sunlight.
Required space for product installation
f
To use the installation space efficiently, refer to the 'Corner installation' as shown below.
(Unit: mm)
Corner installation
Top view
Wall installation
800 or more
Side view
500 or more
1000 or more
Obstacles
ENGLISH-7
01
PREAP
AR
A
TION
Содержание AM140RNPDKH Series
Страница 36: ...DB68 08452A 00...