Samson TROVIS 6495-2, Монтаж и эксплуатация

Страница: 64 / 186

7-18 EB 6495-2 EN
Start-up and configuration
End value
1. Activate End menu item depending on
the analog input and signal type.
Example:
A.20.1.10 for Analog input
AI1 and Pt 100 (see Annex A).
2. Set the signal source to the end value.
If the input value is within the range that
can be calibrated, the selection bar is
displayed.
3. Press the enter key ( ) to confirm the
value.
The end value has been calibrated.
7.3.2 Calibrating analog
outputs
Î
Connect a precision measuring instru -
ment at the output.
Zero point
1. Activate Zero menu item depending on
the analog output and signal type.
Example:
A.20.5.1 for Analog output
AO1 and mA signal (see Annex A).
2. Set the output signal using the cursor
keys ( and
) to the initial value.
If the output value is within the range that
can be calibrated, the selection bar is
displayed.
3. Press the enter key ( ) to confirm the
value.
The zero point has been calibrated
(reading: 0.0 %).
End value
1. Activate End menu item depending on
the analog output and signal type.
Example:
A.20.5.2 for Analog output
AO1 and mA signal (see Annex A).
2. Set the output signal using the cursor
keys ( and
) to the end value.
If the output value is within the range that
can be calibrated, the selection bar is
displayed.
3. Press the enter key ( ) to confirm the
value.
The end value has been calibrated (read-
ing: 100.0 %).