Samson TROVIS 6495-2, Монтаж и эксплуатация

Страница: 163 / 186

EB 6495-2 EN 16-53
Annex A (configuration guide)
O.3 Analog output AO3
Default
setting
Setting
-37 Output master controller YM <M.1-3>
-38 Y1*Y2*AO3.KM/100 < M.1-5/-6>
-39
(100–Y1)*Y2*AO3.KM/100 <M.1-5/-6>
AO3.FX Constant output value <O.3.1-4> [–10.0 ... 110.0 %] 0.0 %
A03.KM Constant, mixing operation <O.3.1-38/-
39>
[0.0 … 100.0] 1.0
O.3.2 Output signal <O.3.1≠0> O.3.2-1
-1
4-20 mA
-2 0-20 mA
-3 0-10 V
-4
2-10 V
AO3.MIN Minimum output value [–10.0 ... 110.0 %] 0.0 %
AO3.MAX Maximum output value [–10.0 ... 110.0 %] 100.0 %
O.3.3 Operating direction <O.3.1≠0> O.3.3-1
-1
Increasing
-2
Decreasing
AO3.P1 Y value for AO3=AO3.MIN <O.3.3-1>
Y value for AO3=AO3.MAX <O.3.3-2>
[–10.0 ... 110.0 %] 0.0 %
The default value of AO3.P1 is the same as AO3.MIN .
If AO3.MIN is changed, AO3.P1 is set to AO3.MIN .
AO3.P2 Y value for AO3=AO3.MAX <O.3.3-1>
Y value for AO3=AO3.MIN <O.3.3-2>
[–10.0 ... 110.0 %] 100.0 %
The default value of AO3.P2 is the same as AO3.MAX .
If AO3.MAX is changed, AO3.P2 is set to AO3.MAX .
O.3.4 Output ramp <O.3.3-1, O.3.5-0> O.3.4-0
-0
Off
-1
Increasing, start with DI1
-2 Increasing, start with DI2
-3 Increasing, start with DI3
-4
Increasing, start with DI4
AO3.GD Gradient <O.3.4≠0> [0.1 ... 100.0 %] 1.0 %
AO3.TB Time base <O.3.4≠0> [s, min, h] s
AO3.ST Initial value <O.3.4≠0> [–10.0 ... 110.0 %] 0.0 %
O.3.5 Limit output rate <O.3.1≠0, O.3.4-0> O.3.5-0
-0
Off
-1 Increasing, continuously active
-2 Decreasing, continuously active
-3
Increasing and decreasing
-4
Increasing. Start with DI1